manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 92 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 92

 Important

 Do not touch other parts besides the ink tanks.
 Handle the ink tank carefully to avoid staining of clothing or the surrounding area.
 Discard the empty ink tank according to the local laws and regulations regarding disposal of

consumables.

 Note

 Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one

when replacing two or more ink tanks.

 For details on ink lamp flashing speed, see 

Checking the Ink Status with the Ink Lamps

.

5.

Prepare a new ink tank.

(1)

 Take a new ink tank out of its package, remove the orange tape (

)

completely, then remove the protective film (

) completely.

 Important

 Handle an ink tank carefully. Do not drop or apply excessive pressure to it.
 If the orange tape remains on the Y-shape air hole 

(B)

, ink may splash or the machine may

not print properly.

(2)

 Hold the ink tank with the orange protective cap 

(C)

 pointing up while being

careful not to block the Y-shape air hole 

(B)

.

(3)

 Lift up the tab on the orange protective cap 

(C)

 to remove it off GENTLY.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments