manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 244 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 244

Legal Limitations on Use of Your Product and Use of Images

It may be unlawful to make copies of, scan, print, or use reproductions of the following documents.
The list provided is non-exhaustive. When in doubt, check with a legal representative in your
jurisdiction.

 Paper money
 Money orders
 Certificates of deposit
 Postage stamps (canceled or uncanceled)
 Identifying badges or insignias
 Selective service or draft papers
 Checks or drafts issued by governmental agencies
 Motor vehicle licenses and certificates of title
 Traveler's checks
 Food stamps
 Passports
 Immigration papers
 Internal revenue stamps (canceled or uncanceled)
 Bonds or other certificates of indebtedness
 Stock certificates
 Copyrighted works/works of art without permission of copyright owner

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments