manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 94 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 94

 You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in

the correct position according to the label on the print head holder.

 You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks.

7.

Close the ink cover, then close the document cover gently.

 Important

 Hold the document cover firmly when closing it because it is heavy.
 When opening or closing the document cover, do not touch the buttons and LCD on the

operation panel. Doing so may result in an unexpected operation.

 Note

 If the error message appears after the ink cover is closed, take appropriate action.

A Message Is Displayed

 When you start printing after replacing the ink tank, the machine starts cleaning the print head

automatically. Do not perform any other operations until the machine completes the cleaning of
the print head.

 If the print head is out of alignment, as indicated by misaligned printed ruled lines or similar

symptoms, adjust the print head position.

Aligning the Print Head

 The machine may make noise during operation.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments