Canon MX720 Series Online Manual Download Page 155

Page: 155 / 248

•

Bonjour settings

Setting items for LAN using Bonjour for Mac OS.

Enable/disable Bonjour

Selecting

Enable

allows you to use Bonjour to perform the network settings.

Service name

Specifies the Bonjour service name. You can use up to 48 characters for the name.

Note

You cannot use the same service name as that already used for other LAN connected

devices.

•

LPR protocol setting

Activates/deactivates the LPR setting.

•

PictBridge communication

Setting items for printing from a PictBridge compliant device.

Enable/disable communication

Selecting

Enable

allows you to print from a PictBridge compliant device.

Timeout setting

Specifies the timeout length.

•

Wireless LAN DRX setting

Selecting

Enable

allows you to activate discontinuous reception when using wireless LAN. It

allows you to save electricity.

Note

Depending on the access point you are using, discontinuous reception may not be activated

even though

Enable

is selected.

Discontinuous reception is activated only while the machine is on standby. (The LCD is in

the screen saver mode.)

•

Wired LAN DRX setting

Selecting

Enable

allows you to activate discontinuous reception when the machine is connected

to a device compatible with wired LAN. It allows you to save electricity.

•

Reset LAN settings

Initializes the network settings on the machine.

Important

Note that initialization erases all connection settings with computers, and printing or scanning

operation may become impossible. To use the machine over network, perform setup with the
Setup CD-ROM. Be careful when you initialize the network settings on the machine.

Note

When you initialize the network settings using IJ Network Tool:

Initializing the Network Settings of the Machine

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 155 / 248

Search results

Summary of Contents for MX720 Series

Reviews: