Canon MX720 Series Online Manual Download Page 189

Page: 189 / 248

Initializing the Network Settings of the Machine

Important

Note that initialization erases all network settings on the machine, printing, scanning, or faxing

operation from a computer over network may become impossible. To use the machine over
network, setup with the Setup CD-ROM.

Start up IJ Network Tool.

Starting up IJ Network Tool

Select the printer in

Printers:

Select

Maintenance...

from the

Settings

menu.

The

Maintenance

screen is displayed.

Click

Initialize

When the confirmation screen is displayed, click

Yes

The network settings of the printer is initialized.
Do not turn off the printer during initialization.
Click

when initialization is complete.

Performing initialization when connected over wireless LAN will break the connection, so setup
with the Setup CD-ROM.

Note

You can change the network settings of the printer using IJ Network Tool with USB connection

after initializing the LAN settings. To change the network settings using Canon IJ Network Tool,
activate wireless LAN in advance.

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 189 / 248

Search results

Summary of Contents for MX720 Series

Reviews: