manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 177 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 177

IJ Network Tool

IJ Network Tool is a utility that enables you to display and modify the machine network settings. It is
installed when the machine is set up.

Important

To use the machine over LAN, make sure you have the equipment necessary for the connection

type, such as an access point or a LAN cable.

Do not start up IJ Network Tool while printing.
Do not print when IJ Network Tool is running.
If the firewall function of your security software is turned on, a message may appear warning

that Canon software is attempting to access the network. If the warning message appears, set
the security software to always allow access.

IJ Network Tool has been verified to work on Windows XP, however, it does not support Fast

User Switching. It is recommended to exit IJ Network Tool when switching users.

Starting up IJ Network Tool

1.

Click 

Start

 and select 

All programs

, 

Canon Utilities

, 

IJ Network Tool

, and then 

IJ Network

Tool

.

Note

You can also start up IJ Network Tool by clicking 

 

Network Settings

 from 

Device

Settings & Maintenance

 on Quick Menu.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments