manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 156 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 156

Device user settings

•

Date/time setting

Sets the current date and time.

Setting the Sender Information

•

Date display format

Sets the format of dates displayed on the LCD and printed on sent faxes and photos.

Note

When 

ON

 is selected for 

Print date

 on the print settings screen in printing from a USB flash

drive, the shooting date is printed in the date display format you selected.

Setting Items

•

Summer time setting

Enables/disables the summer time setting. If you select 

ON

, you can select additional sub-settings.

This setting may not be available depending on the country or region of purchase.

•

Start date/time

Sets the date and time that summer time starts.

Month

: Specify the month.

Week

: Specify the week.

DOW

: Specify the day of the week.

The screen to set the shift time to start summer time will be displayed after specifying the items
above and pressing the 

OK

 button.

After specifying the shift time and pressing the 

OK

 button, you can specify the end date/time.

•

End date/time

Sets the date and time that summer time ends.

Month

: Specify the month.

Week

: Specify the week.

DOW

: Specify the day of the week.

The screen to set the shift time to end summer time will be displayed after specifying the items
above and pressing the 

OK

 button.

Specify the shift time, then press the 

OK

 button.

•

Sound control

Selects the volume.

•

Keypad volume

Selects the beep volume when pressing the buttons on the operation panel.

•

Alarm volume

Selects the alarm volume.

•

Line monitor volume

Selects the line monitor volume.

•

Offhook alarm

Selects the alarm volume when the phone receiver is not put on the hook properly.

•

Country or region

Selects the country or region where you are using the machine.

Note

This setting may not be available depending on the country or region of purchase.

•

Key repeat

Enables/Disables continuous input by pressing and holding down the  ,  , 

, 

, 

+

, or 

-

 button

when setting the number of copies, changing the photo displayed on the LCD, setting the zoom ratio,
etc.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments