manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 23 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 23

• From an Apple device: Press the 

Home

 button on the Apple device twice. Tap the 

Print

 icon and

display the print job list. Tap the print job to be canceled, and then tap 

Cancel Print

.

AirPrint Troubleshooting

If the document does not print, check the following:

1.

Check that the machine power is on. If the machine power is on, turn it off and then
back on again, and check whether the issue is resolved.

2.

Check that the machine is connected by LAN to the same network subnet as the
device on which iOS is installed.

3.

Check that the machine has enough paper and ink.

4.

Check that no error message is displayed on the machine operation panel.

If the problem persists, use the printer driver on your computer to execute printing and check whether
the document can be printed normally on the machine.

If the document cannot be printed, refer to the 

Online Manual

 for your model.

Note

 After you turn on the machine, it may take few minutes before the machine can communicate

through a wireless LAN connection. Confirm that the machine is connected to the wireless LAN, and
then try printing.

 If Bonjour on the machine is disabled, AirPrint cannot be used. Check the LAN settings on the

machine, and enable Bonjour.

Note

 The windows used in the explanations may differ from those displayed by your Apple product or

application software.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments