Canon MX720 Series Online Manual Download Page 142

Page: 142 / 248

To save the page size, orientation, and number of copies that was set in each sheet, click

Options...

and check each item.

Note

When you install the printer driver again or upgrade the version of the printer driver, the print settings

you registered will be deleted from

Commonly Used Settings

Registered print settings cannot be saved and preserved. If a profile is deleted, register the print
settings again.

Deleting Unnecessary Printing Profile

Select the printing profile to be deleted

Select the printing profile you want to delete from the

Commonly Used Settings

list on the

Quick

Setup

tab.

Delete the printing profile

Click

Delete

. When the confirmation message appears, click

The selected printing profile is deleted from the

Commonly Used Settings

list.

Note

Printing profiles that are registered in the initial settings cannot be deleted.

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 142 / 248

Search results

Summary of Contents for MX720 Series

Reviews: