manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 239 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 239

Key Points to Successful Printing

Check the machine status before printing!

 Is the print head OK?

If a print head nozzle is clogged, print will be faint and papers will be wasted. Print the nozzle
check pattern to check the print head.

Maintenance Procedure

 Is the inside of the machine smeared with ink?

After printing large quantities of paper or performing borderless printing, the area where papers
go through may get smeared with ink. Clean the inside of your machine with Bottom Plate
Cleaning.

Cleaning the Inside of the Machine (Bottom Plate Cleaning)

Check how to load the paper correctly!

 Is the paper loaded in the correct orientation?

To load paper in a cassette, load paper WITH THE PRINT SIDE FACING DOWN.

Loading Paper

(A)

 cassette (upper)

(B)

 cassette (lower)

 Is the paper curled?

The curled paper causes paper jam. Flatten the curled paper, then reload it.

"Load the paper after correcting its curl." in Paper Is Smudged/Printed Surface Is Scratched

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments