manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 248 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 248

Mobile Printing Capability

Apple AirPrint

Google Cloud Print

 Windows: Operation can only be guaranteed on a computer with Windows 8, Windows 7,

Windows Vista or Windows XP pre-installed.

 Windows: Internet Explorer 7, 8 or 9 is required to install Easy-WebPrint EX.

Easy-WebPrint EX for Internet Explorer 9 can be downloaded from the Canon web site.

 Windows: Some functions may not be available with Windows Media Center.
 Windows: .NET Framework 4 or 4.5 must be installed to use the Windows software.
 Windows: XPS Essentials Pack is required to print on Windows XP.
 Mac OS: Hard Disk must be formatted as Mac OS Extended (Journaled) or Mac OS Extended.
 Mac OS: For Mac OS, an internet connection is required during software installation.
 Windows: The TWAIN driver (ScanGear) is based on the TWAIN 1.9 Specification and requires

the Data Source Manager bundled with the operating system.

Specifications are subject to change without notice.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments