manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 44 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 44

Turning the Machine On and Off

Turning on the machine

1.

Press the 

ON

 button to turn on the machine.

The lamp on the 

COPY

 button flashes and then remains lit blue.

Confirming that the Power Is On

 Note

 It may take a while for the machine to start printing immediately after you turn on the machine.
 If the 

Alarm

 lamp lights up or flashes orange and an error message is displayed on the LCD,

see A Message Is Displayed.

Turning off the machine

1.

Press the 

ON

 button to turn off the machine.

When the lamp on the selected mode button (e.g., the 

COPY

 button) or 

MENU

 button stops flashing,

the machine is turned off after all the lamps on the operation panel go out.

 Important

 When you unplug the power cord after turning off the machine, be sure to confirm that all the

lamps on the operation panel are off.

Notice for Unplugging the Power Cord

 Note

 The machine cannot send or receive faxes when the power is turned off.
 The power cannot be turned off while the machine is sending or receiving a fax, or when unsent

faxes are stored in the machine's memory.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments