Canon MX720 Series Online Manual Download Page 84 | Manualshive

Page: 84 / 248

Canon MX720 Series Online Manual Download Page 84

Loading Two or More Originals on the platen glass

Scan two or more printed photos in Photo copy
In the scan mode,

- select Auto scan for Doc.type to scan two or more printed photos, postcards, or business
cards
- select Photo for Doc.type and specify Auto multi scan for Scan size to scan two or more
originals

Scan two or more printed photos, postcards, or business cards with a software application on

a computer

Load two or more originals WITH THE SIDE TO SCAN FACING DOWN and place them at least 0.4 inches
(10 mm) away from the edges of the platen glass and at least 0.4 inches (10 mm) apart from each other.

(A)

0.4 inches (10 mm)

Note

The Skew Correction function automatically compensates for the originals placed at an angle of up to

approximately 10 degrees. Slanted photos with a long edge of 7.1 inches (180 mm) or more cannot
be corrected.

Non-rectangular or irregular shaped photos (such as cut out photos) may not be scanned properly.

«
...
82
83
84
85
86
...
»

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments