Canon MX720 Series Online Manual Download Page 81

Page: 81 / 248

Loading Documents in the ADF (Auto Document Feeder)

You can load documents to copy, fax, or scan in the ADF (Auto Document Feeder).

Note

To scan a document at optimum quality, load it on the platen glass.

Make sure that any original has been removed from the platen glass.

Load a document in the ADF.

(1)

Open the document tray.

(2)

Insert the document in the document tray until you hear a beep sound.

Load the document WITH THE SIDE TO SCAN FACING UP in the document tray.

Originals You Can Load

Note

When you set the alarm to be silent in

Sound control

Device user settings

, the alarm

will not beep even if the document is inserted in the document tray.

Device user settings

(3)

Adjust the document guides to match the width of the document.

Do not slide the document guides too hard against the document. The document may not be fed
properly.

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 81 / 248

Search results

Summary of Contents for MX720 Series

Reviews: