manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 158 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 158

Mobile phone print settings

When printing from a mobile phone through Bluetooth communication, select the print settings such as
page size, media type, and so on.
For details on how to print from a mobile phone through Bluetooth communication:

Printing from Mobile Phone via Bluetooth Communication

Note

This menu is displayed only when the optional Bluetooth Unit is attached.

1.

Page size

Select the page size for printing photos saved on a mobile phone.

2.

Type

 (Media type)

Select the media type for printing photos saved on a mobile phone.

3.

Border

 (Bordered/Borderless print)

Select the bordered/borderless layout for printing photos saved on a mobile phone.

4.

Image optimizer

Select 

ON

 to correct and smooth out the jagged contours when printing.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments