Canon MX720 Series, Online Manual, Page: 111 / 248

Aligning the Print Head Manually
If printed ruled lines are misaligned or print results are still not satisfactory after adjusting the print head
position automatically, adjust the print head position manually.
Note
For details on adjusting the print head position automatically, see Aligning the Print Head .
The print head alignment pattern is printed in black and blue.
You need to prepare: three sheets of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Make sure that three or more sheets of A4 or Letter-sized plain paper are loaded in
the cassette (lower).
3. Open the paper output tray.
(1) Holding both sides of the paper output tray, gently open it.
The output tray extension will open automatically when the paper output tray is opened.
(2) Extend the paper output support.
4. Print the print head alignment pattern.
(1) Press the MENU button.
(2) Select Setup , then press the OK button.
LCD and Operation Panel
The setup menu screen will appear.
(3) Select Maintenance , then press the OK button.
The Maintenance screen will appear.
(4) Select Manual head alignment , then press the OK button.
The confirmation screen will appear.
Note
To print and check the current head position adjustment values, select Print the head
alignment value .
(5) Select Yes , then press the OK button.
The print head alignment pattern is printed.