Canon MX720 Series Online Manual Download Page 221

Page: 221 / 248

Maintenance Screen

Displays to perform

Setting Initialization

and

Network Setup of the Card Slot

To display the

Maintenance

screen, select

Maintenance

from the

Settings

menu.

Setting Initialization

Reverts all the network settings of the printer to factory default. Click

Initialize

to display the

Initialize Settings

screen and click

Yes

to initialize the network settings of the printer. Do not

turn off the printer during initialization. Click

when initialization is complete.

Performing initialization when connected over wireless LAN will break the connection, so setup
with the Setup CD-ROM.

Network Setup of the Card Slot

Note

This item is not available depending on the printer you are using.

Status

displays whether the card slot is mapped as a network drive.

When you click, the

Network Setup of the Card Slot

is displayed.

Network Setup of the Card Slot Screen

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 221 / 248

Search results

Summary of Contents for MX720 Series

Reviews: