manualshive.com logo in svg

Canon MultiPASS L6000, User Manual

Share
Download
Canon MultiPASS L6000 User Manual Download Page 24

Chapter 1

Introduction

1-9

MP-L6000—USERS MANUAL/V000/12-97

Introduction

Loading Paper in the Multi-purpose Tray

The paper you load in the multi-purpose tray is used for printing
documents or for incoming faxes. You can use any plain paper (such 
as copier paper).

When the message 

LOAD PAPER

appears in the LCD display, you need to

add paper to the multi-purpose tray. This tray holds approximately 100
sheets of plain paper.

❍

For best results, fan the paper before loading it.

❍

Always fan a stack of paper along the edge that will feed
into the MultiPASS first.

❍

Stack the paper so the leading edge and sides are even.

Open the paper

guides to the

approximate width

of the 

stack of paper.

2

Fan the paper.

1

ST

ACK_P

APER

P

APER_1

Summary of Contents for MultiPASS L6000




























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands