Canon MultiPASS L6000 User Manual Download Page 185

Page: 185 / 251

Chapter 9

Maintaining the MultiPASS L6000

9-15

Transporting the MultiPASS

If you need to transport the MultiPASS, be very careful.

❍

Unplug the power cord.

❍

Disconnect the telephone lines and parallel cable.

❍

Remove any paper from the multi-purpose tray or manual
feed slot.

❍

Remove any document from the ADF.

❍

Open the front cover and remove the toner cartridge.

❍

Store the toner cartridge in its original protective bag or
wrap it in a thick cloth to avoid any exposure to light.

Remove the

toner cartridge.

Remove any

paper.

Disconnect

all cables.

Close the

front cover.

MP L6000—USERS MANUAL/V000/12-97

Maintaining the

MultiP

ASS C5000

CLOSE_CVR

Summary of Contents for MultiPASS L6000




























































































































































































































































Search results

Summary of Contents for MultiPASS L6000

Reviews:

Related manuals for MultiPASS L6000

Brands by name

Popular brands

Canon MultiPASS L6000, User Manual

Search results

Summary of Contents for MultiPASS L6000

Reviews:

Related manuals for MultiPASS L6000

Brands by name

Popular brands