Canon imageRunner 400 Reference Manual Download

Page: 204 / 260

7–10

Handling Options

Turn the paper stack over, and place it in the paper
drawer.

NOTICE

●

If the copy paper is curled, curl it down before placing it in the
paper drawer.

●

Make sure that the height of the paper stack does not exceed
the limit mark at the back of the paper drawer.

Paper Deck-B1

Close the Paper Deck and reconnect it to the main
unit.

Main Specifications

3500 sheets(20-lb bond (80g/m

))

Paper deck capacity

Acceptable paper sizes

Paper Deck-B1

Name

LTR

20-1/2"

12-3/4"

23" (519mm

323mm

583mm)

Dimensions(H

From Main Unit

Power source

Approx. 90.4 lb (41kg)

Weight

CAUTION

●

When returning the Paper Deck to its original position,
be careful not to get your fingers caught, as this may
result in personal injury.

Main Specifications

Summary of Contents for imageRunner 400





































































































































































































































































Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands

Canon imageRunner 400, Reference Manual

Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands