Canon imageRunner 400 Reference Manual Download

Page: 113 / 260

Useful Copy Functions

3–31

Making Copies with the Original Ima

ge
Repeated (

IMA
GE REPEA

)

The Image of the Original is Copied Repeatedly

Press the [IMAGE REPEAT] key.

Set the number of Image repeat times for each
of the lengthwise and widthwise directions.

Press the [DONE] key.

The display returns to the Basic Features screen.

Proceed to make copies in the usual way.

MEMO

●

To cancel the settings, press the [SPECIAL FEATURES], [IMAGE REPEAT], and [C] keys in
that order.

●

You can also cancel the mode by pressing the

Reset

key. (The machine returns to the Standard

mode.)

■

Automatic setting:
Press the [OK] key.

MEMO

●

The maximam number of times the image can be set
to repeat is 20.

●

Sometimes the designated image will overlap
depending on how many times you have manually set
it to be repeated.

■

Manual setting:
Press the [+] or [-] key to set. You can also set the number of
repeats by the Number keys.

MEMO

●

To make repeated copies with the number of repeats
automatically set, select the copy paper size. The original
image is then copied so that the maximum possible
number of copies fit in the selected copy paper size.

Press the [OK] key.

The display reverts to the Special Features screen.

Summary of Contents for imageRunner 400





































































































































































































































































Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands

Canon imageRunner 400, Reference Manual

Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands