Canon imageRunner 400 Reference Manual Download

Page: 80 / 260

Basic Copying

2–38

Two-Sided Copying

Making

o-sided Copies fr

om F

acing P

es in a Book in One Step (BOOK

→

2-SIDED)

The display returns to the Basic Features screen

and “BOOK

▼

2 ” is displayed above the [TWO-

SIDED] key.

Proceed to make copies in the usual way.

For the next two facing pages, place the original and press the

Start

key again. (See "Memory Copy of Original on Platen Glass,"

on p. 2-29.)

MEMO

●

To cancel the setting, press the [TWO-SIDED] and [C]
keys in that order.

●

You can also cancel the mode by pressing the

Reset

key.

(The machine returns to the standard mode.)

Summary of Contents for imageRunner 400





































































































































































































































































Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands

Canon imageRunner 400, Reference Manual

Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands