Canon imageRunner 400 Reference Manual Download

Page: 54 / 260

Basic Copying

2–12

MEMO

●

To return the copy ratio to 100%, press the [DIR.]
key.

●

You can also cancel the mode by pressing the

Reset

key. (The machine returns to the Standard mode.)

●

If the original was placed on the platen glass, the
zoom ratio appears when the platen cover or
feeder is lowered.

●

If the original was placed in the feeder, the zoom
ratio appears when the

Start

key is pressed.

●

The copy ratio is set within the range of 25% to
800%.

utomaticall

y Setting the Cop

y Ratio Based on the Original and Cop

y P
aper Siz

es (A

UT
O ZOOM)

Changing the Copy Ratio (Enlarging/Reducing Originals)

Press the [ZOOM] key.

Press the [AUTO] key and then the [DONE] key.

Proceed to make copies in the usual way.

Summary of Contents for imageRunner 400





































































































































































































































































Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands

Canon imageRunner 400, Reference Manual

Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands