7–16
Handling Options
Finisher-C1/
Saddle Finisher-C2
Functions common to Finisher-C1 and Saddle Finisher-C2
■
Staple-collate Functions:
• A Collate function for collating copies into sets arranged in page order
• A Group function for grouping together and outputting all copies of the same original.
• A Staple-collate function for collating and automatically stapling copies into sets
arranged in page order
■
TRAY Functions:
• Output Designation for Each Tray
Function provided only on Saddle Finisher-C2
■
Booklet function
• This function enables you to make booklets consisting of pages folded and stapled
at the centre.
Output Tray
Copy or FAX output sheets
will be delivered to
these trays.
You can set the tray
function so that the output
of a specified function,
copy, fax or printer is
delivered to a designated
tray.
TRAY A
TRAY B
TRAY C
Booklet tray
The paper that is
folded and stapled
at the center to form a booklet
is delivered to this tray.
* Only installed in Saddle Finisher-C2.
Front cover (lower)
Open this cover when a
paper jam or staple jam occurs
in the saddle stitcher unit,
or when replacing the saddle
stitcher unit staple cartridge.
(See "When a Paper Jam Occurs
in the Saddle Stitcher Unit," on
p.7-25, "Replaceing the Saddle
Stitcher Unit Staple Cartridge," on
p.7-27 and "Removing Jammed
Staples from the Saddle Stitcher
Unit," on p.7-29.) * Only installed
in Saddle Finisher-C2.
Front cover (upper)
Open this cover to replace the staple
case in the staple unit, or when a
staple jam occurs.
(See "Removing Jammed Staples
from the Stapler Unit," on p.7-23.)
Upper cover
Open to removed jamed paper.
(See "Clearing Paper Jams," on p. 7-19.)
Interrupt tray
Interrupt copies are delivered to this tray.
* The illustration shows Saddle Finisher-C2.
Parts and Their Functions
* In the description on the following pages Finisher-C1 and Saddle Finisher-C2 are referred to collectively as “finisher”
unless otherwise stated.
Parts and Their Functions
