Canon imageRunner 400 Reference Manual Download

Page: 95 / 260

Useful Copy Functions

3–13

Makes copies with the entire image shifted to the center or a corner.

Making Copies with Original Images
Shifted

(SHIFT)

11”

17”

Copy with original image
shifted to the center
11”

17”

Copy with original image
shifted to a corner
11”

17”

11”

17”

Original
STMTR

Place your original and press the [SPECIAL FEA-
TURES] key.

Press the [SHIFT] key.

Select the shift direction by using the arrow
keys, then press the [OK] key.

The display returns to the Special Features screen.

MEMO

●

The image will shift in the exactly opposite direction of
the selected arrow.

Press the [DONE] key.

The display returns to the Basic Features screen.

Proceed to make copies in the usual way.

MEMO

●

To cancel the settings, press the [SPECIAL FEATURES], [SHIFT], and [C] keys in that order.

●

You can also cancel the mode by pressing the

Reset

key. (The machine returns to the Standard mode.)

Making Copies with Original Images Shifted (SHIFT)

Summary of Contents for imageRunner 400





































































































































































































































































Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands

Canon imageRunner 400, Reference Manual

Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands