Canon imageRunner 400 Reference Manual Download

Page: 168 / 260

Loading P

aper and Adding

The T

oner

5–8

When there is only a small amount of toner remaining, the message shown below prompt-
ing you to add toner appears in the touch panel display.

Adding Toner

Ad
ding T

oner

REQUEST

●

Use only the recommended toner (imageRUNNER 400/330
Series Toner) for use on this machine.

●

Never add more than one toner cartridge.

Example: When there is only a small amount of toner

remaining during copying, the display on the
left appears in the touch panel display.
Follow the procedure below to add toner.

WARNING

●

Never dispose of waste toner in a fire or incinerator. Doing so may
result in an explosion.

Open the front cover of the main unit.

Push the blue lever to the right.

Grip the gray handle on the toner box. Pull
out the toner box until it stops.

Toner box

Summary of Contents for imageRunner 400





































































































































































































































































Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands

Canon imageRunner 400, Reference Manual

Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands