Canon imageRunner 400 Reference Manual Download

Page: 148 / 260

Setting and Adjusting Custom Common Settings to Suit

our Needs

4–27

Enter the desired time period with the Number
keys (

) or [+] [–] keys, then press the

[OK] key.

Call up the desired screen as follows:

Additional Functions

Key

Press the [DONE] key.

Repeat this until the Basic Features screen appears again.

Timer Settings

Setting the

Time

That the Unit’

s P
ower
Turns OFF on Diff

erent Da

ys of the

eek (D

AIL
Y

TIMER SETTINGS)

Setting the Time That the Unit’s Power Turns OFF on Different
Days of the Week

(DAILY TIMER SETTINGS)

Sets the time that the machine is automatically turned OFF on different days of the week.
• Setting range:Daily from Sunday to Saturday, 00:00 to 23:59 in one-minute increments
• The initial setting:No setting

MEMO

●

When the auto clear time and weekly timer are both set, the auto clear time has priority.

Select the day of the week, enter the time with
the Number keys, and then press the [OK] key.

Call up the desired screen as follows:

Additional Functions

Key

Press the [DONE] key.

Repeat this until the Basic Features screen appears again.

MEMO

●

The time is expressed as four continuous digits in the
form of "Hours" and "Minutes".
Example:

7:05 a.m.

→

0705

11:18 p.m.

→

2318

●

If you make a mistake when entering the time, choose
the day of the week again, then enter a four-digit
number.

●

If you do not want to specify the time, press the

Clear

key.

Summary of Contents for imageRunner 400





































































































































































































































































Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands

Canon imageRunner 400, Reference Manual

Search results

Summary of Contents for imageRunner 400

Reviews:

Related manuals for imageRunner 400

Brands by name

Popular brands