Setting and Adjusting Custom Common Settings to Suit
Y
our Needs
4–25
Setting the Current Date and Time (DATE/TIME)
Sets the current date and time. The date and time set here is printed at the top of documents received
by FAX. It is also used as the time setting required for functions for which the time can be set.
Setting the Current Date and
Time (D
A
TE/TIME)
Setting the
Time to Initiate A
uto Sleep after Finishing Operations (A
UT
O SLEEP
TIME)
MEMO
●
The initial setting is [ 1 ] hour.
●
Documents received by FAX and instructions from a host computer can be printed even while the machine
is in the Sleep mode.
1
Enter the current date (year, month, day) and time
with the Number keys (
0
-
9
), then press the
[OK] key.
Enter the date and time as a continuous ten-digit number.
2
Press the [DONE] key.
Repeat this until the Basic Features screen appears again.
3
Setting the Time to Initiate Auto Sleep after Finishing Operations
(AUTO SLEEP TIME)
If the machine is not operated (no keys are pressed) for a certain period of time, the control panel power
switch automatically moves to the OFF position to save power. The machine then enters the Sleep
mode.
Call up the desired screen as follows:
Additional Functions
Key
1
Call up the desired screen as follows:
Additional Functions
Key
1
MEMO
●
The Timer settings screen is made up of several screens. Use the [
▲
] and [
▼
] keys to scroll to the desired
screen and make the required settings.
●
When [
▲
] or [
▼
] should be pressed, the indication
is displayed in this manual.
Timer Settings
MEMO
●
Enter only the last two digits for the year.
●
Enter the date as four digits without a space, such as
0605 for June 5.
●
Enter the time in 24-hour notation as four digits
without a space, such as 1503 for 15:03.
●
If you make a mistake when entering values, press the
C
Clear
key, and enter the values again starting with the year.
●
The year 2000 will be displayed as 00.
