7–18
Handling Options
TRAY Functions
TRA
Y Functions
Booklet Function
Finisher-C1/Saddle Finisher-C2
Output Designation for Trays
You can output to the three trays specified as either FAX or copy output trays. You can set which
function should be output to each of the three trays by setting TRAY in Custom Common Settings under
Additional Functions. (See p. 4-13.)
MEMO
●
The system is set as follows before leaving the factory.
• Tray A: Copy
• Tray B: No setting*
• Tray C: No setting*
* If you leave the setting of tray at “No setting”, no prints are delivered.
●
You cannot set “Copy” for tray C only.
●
We recommend attaching the supplied labels to the trays for identifying their respective use. Blank labels are
also provided which you can fill out yourself.
●
If you make copies while printing a fax, the copies are sometimes delivered to the interrupt tray.
Sliding Function
If you make copies with the Collate function and Group function set, the first
page of the printing paper is shifted approximately 1-1/4" (30 mm) and then
delivered.
This function is only available with the Saddle Finisher-C2.
This function enables you to make booklets consisting of pages folded and stapled at the centre.
MEMO
●
The maximum number of sheets that can be bound is 15 (60 pages).
6
5
4
3
4
3
2
1
3
8
7
6
5
8
7
2
1
6
8
1
Originals
Staple
The pages are folded with a
roller to form a booklet.
5
4
3
2
1
Booklet Function
