Canon imagePROGRAF iPF9400S Basic Manual Download Page 28

Page: 28 / 154

Note

•

Dispose of used ink tanks according to local regulations.

Load the Ink Tank (330 ml)

Before opening the pouch, tilt the Ink Tank to the left
and right gently seven or eight times.

Important

•

Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out.

•

If you do not agitate the Ink Tank, the ink may settle, which may affect printing quality.

Open the pouch and remove the Ink Tank.

Important

•

Never touch the ink holes or electrical contacts. This may cause stains, damage the Ink Tank, and affect print-
ing quality.

Replacing Ink Tanks

iPF9400S

Basic Guide

Consumables and Maintenance

Ink Tanks

Summary of Contents for imagePROGRAF iPF9400S



























































































































































Search results

Summary of Contents for imagePROGRAF iPF9400S

Reviews:

Related manuals for imagePROGRAF iPF9400S

Brands by name

Popular brands

Canon imagePROGRAF iPF9400S, Basic Manual

Search results

Summary of Contents for imagePROGRAF iPF9400S

Reviews:

Related manuals for imagePROGRAF iPF9400S

Brands by name

Popular brands