Canon imagePROGRAF iPF9400S Basic Manual Download Page 79

Page: 79 / 154

Grasp the Belt, insert it between the Belt Stopper,
and affix the Belt Stopper with a hex screw at the
position indicated.

Important

•

Here, the Belt Stopper is the one that was removed and stored after initial installation. Neglecting to attach
the Belt Stopper may damage the printer.

•

Do not touch the Linear Scale (a), Carriage Shaft
(b), or Fixed Blade (c). This may stain your
hands and damage the printer.

Close the Top Cover.

Tape down printer covers to secure them, in the reverse order of tape removal during installation.

If the Output Stacker is installed, reverse the installation procedure to remove the Output Stacker.

iPF9400S

Preparing to Transfer the Printer

Basic Guide

Printer Relocation

Preparing to Transfer the Printer

Summary of Contents for imagePROGRAF iPF9400S



























































































































































Search results

Summary of Contents for imagePROGRAF iPF9400S

Reviews:

Related manuals for imagePROGRAF iPF9400S

Brands by name

Popular brands

Canon imagePROGRAF iPF9400S, Basic Manual

Search results

Summary of Contents for imagePROGRAF iPF9400S

Reviews:

Related manuals for imagePROGRAF iPF9400S

Brands by name

Popular brands