Cause
Corrective Action
You have attempted to print on a roll, but no
roll is loaded.
(See "Loading Rolls in the Printer.")
→P.11
Press
▲
or
▼
and select
Stop Printing
or press the
Stop
button to stop printing.
Roll printing is selected, but sheets are loaded.
Roll printing is selected, but sheets are loaded.
Cause
Corrective Action
A print job for rolls was received when a sheet is
loaded.
Follow these steps to load and print on a roll.
1.
Press
▲
or
▼
to select
Eject Paper
, press the
OK
button, and remove the sheet.
(See "Removing Sheets.")
→P.21
2.
Load a new roll.
(See "Loading Rolls in the Printer.")
→P.11
The printer now starts printing the print job.
Press
▲
or
▼
to select
Stop Printing
, and then press the
OK
button.
The roll is empty.
The roll is empty.
Cause
Corrective Action
The roll is empty.
Follow these steps to replace the used roll with a new roll of the same type and size.
1.
Lift the Release Lever and remove the roll.
(See "Removing the Roll from the Printer.")
→P.15
(See "Removing the Roll Holder from Rolls.")
→User's Guide
2.
Load the new roll.
(See "Attaching the Roll Holder to Rolls.")
→P.9
(See "Loading Rolls in the Printer.")
→P.11
3.
If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.")
→User's Guide
4.
When you have selected
ManageRemainRoll
>
On
in the control panel menu and a barcode is
not printed on the roll, also specify the paper length.
(See "Specifying the Paper Length.")
→User's Guide
5.
If "
Not finished printing. Finish printing remaining jobs?
" is shown on the Display Screen,
press the
OK
button.
Printing will resume, starting from the page on which the error occurred.
There is remaining roll paper, but
because it could not be advanced,
it could not be detected.
•
If the trailing edge of the paper
is taped to the roll paper core
The paper was not advanced because the trailing edge is taped to the roll paper core.
Remove the used roll paper and insert a new roll paper.
(See "Removing the Roll from the Printer.")
→P.15
(See "Removing the Roll Holder from Rolls.")
→User's Guide
(See "Loading and Printing on Rolls.")
→User's Guide
There is remaining roll paper, but
because it could not be advanced,
it could not be detected.
•
If the unused portion of the roll
paper is heavy and is placing a
burden on the printer
The paper was not advanced because the unused portion of the roll paper is heavy and is placing a
burden on the printer.
It may be helpful to change the printing mode, which will change the paper feed timing.
Choose a higher level of
Print Quality
in the
Advanced Settings
of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
→User's Guide
iPF9400S
Roll printing is selected, but sheets are loaded.
Basic Guide
Error Message
Messages regarding paper
133
