Cannot load sheets
Cannot load sheets
Cause
Corrective Action
The paper source selection is incorrect.
Press the
Load
button and select the paper source.
Paper is not cut straight
Paper is not cut straight
Cause
Corrective Action
The paper is bent or curled at the cut position.
Straighten out any curling by the edges of the paper.
Paper rises by the ends of the cut position before
it is cut.
Reload the paper correctly.
You are using paper that cannot be cut with the
Cutter Unit.
Specify
Manual
in
Cutting Mode
in the Control Panel menu and use scissors or a
cutting tool to cut the roll after printing.
(See "Specifying the Cutting Method for Rolls.")
→User's Guide
The Cutter Unit is not installed correctly.
Reinstall the Cutter Unit correctly.
(See "Replacing the Cutter Unit.")
→P.42
The Cutter Unit blade is worn out.
Replace the Cutter Unit.
(See "Replacing the Cutter Unit.")
→P.42
Cut Speed
is not configured correctly in the Con-
trol Panel menu.
Change the
Cut Speed
setting in the Control Panel menu.
(See "Menu Structure.")
→P.62
During cutting, printed documents fall out at an
angle.
In the Control Panel menu, set
Cutting Mode
to
Eject
. Hold documents after printing,
as they are cut.
(See "Specifying the Cutting Method for Rolls.")
→User's Guide
Paper is not cut
Paper is not cut
Cause
Corrective Action
In the printer driver,
No
or
Print Cut
Guideline
is specified in
Automatic
Cutting
.
Specify
Yes
in
Automatic Cutting
in the printer driver.
(See "Page Setup Sheet (Windows).")
→User's Guide
(See "Paper Detailed Settings Dialog Box (Mac OS X).")
→User's Guide
In the Control Panel menu,
Cutting
Mode
is set to
Eject
or
Manual
.
If the
Cutting Mode
is
Eject
, press the
Cut
button to cut the paper.
If the
Cutting Mode
is
Manual
, cut rolls with scissors or the like.
(See "Specifying the Cutting Method for Rolls.")
→User's Guide
The Cutter Unit is not installed.
Install the Cutter Unit.
(See "Replacing the Cutter Unit.")
→P.42
Rolls are not cut when you are using the
Media Take-up Unit.
Either cut the roll paper by pressing the
Cut
button or lift the Release Lever and cut the roll
with scissors.
(See "Removing Printed Documents from the Media Take-up Unit (Optional).")
→User's Guide
The media take-up unit continues rotating
The media take-up unit continues rotating
Cause
Corrective Action
There is a foreign object in the path of the Media Take-up Sensor (indicated by
a dotted line).
Remove the foreign object from the Media Take-up
Sensor path. Arrange the Basket Cloth and Basket Rod
so they do not interfere with the Media Take-up Sensor.
Cannot load sheets
iPF9400S
Basic Guide
Troubleshooting
Problems Regarding Paper
106
