Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot execute this command. Use other paper. ......................................................................................
141
Cannot adjust printhead. ............................................................................................................................
144
Cannot calibrate. ........................................................................................................................................
141
Excessive temperature or humidity. ...........................................................................................................
141
Please execute common calibration. ..........................................................................................................
141
Please commn calibrt using above paper. .................................................................................................
142
Please calibrate using above paper. ..........................................................................................................
142
Borderless printng not possible. Paper stretched or shrank. .....................................................................
142
Before borderless printing, move the blue platen switch. ..........................................................................
142
Borderless printng not possible. .................................................................................................................
137
Blue platen switch is dirty. ..........................................................................................................................
142
Move the blue platen switch No.xx to the right. (xx represents a number) ................................................
143
Cannot adjust paper feed. ..........................................................................................................................
143
Check printed document. ...........................................................................................................................
143
Cannot execute this command. Use other paper.
Cannot execute this command. Use other paper.
Cause
Corrective Action
Paper compatible with
color calibration is not
loaded.
1.
Press the
OK
button to clear the error.
2.
Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See Paper Reference Guide.)
Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot
be completed correctly unless the loaded paper matches the settings.
Cannot calibrate.
Cannot calibrate.
Cause
Corrective Action
The paper for printing a test pattern is soiled. Other-
wise, you have loaded colored paper.
Press the
OK
button to clear the error.
Load unused paper compatible with color calibration.
(See Paper Reference Guide.)
The test pattern was printed too faintly.
Press the
OK
button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.")
→P.110
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction.
Press the
OK
button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
Excessive temperature or humidity.
Excessive temperature or humidity.
Cause
Corrective Action
The temperature or humidity where the
printer is installed is out of the acceptable
range for operation.
Press
▲
or
▼
to select
Stop
, and then press the
OK
button to stop printing.
Use the printer under suitable environmental conditions. Also note that various environmental
conditions are recommended for various types of paper. For details on the recommended en-
vironmental conditions, see the Paper Reference Guide.
(See Paper Reference Guide.)
Press
▲
or
▼
to select
Continue
, and then press the
OK
button to continue with color cali-
bration. However, note that correct adjustment may not be possible.
Please execute common calibration.
Please execute common calibration.
Cause
Corrective Action
There is not even one Common calibration execution result.
Execute Common calibration.
iPF9400S
Cannot execute this command. Use other paper.
Basic Guide
Error Message
Messages regarding printing or adjustment
141
