6
If the paper is not visible, lift the Ejection Guide, re-
move the Roll Holder, and clear the paper jam from
below.
After removing the paper, make sure there are no
other scraps of paper in the printer, and then lower
the Ejection Guide.
7
If the Carriage is on the left, move the Carriage to
the right until it stops.
Important
•
Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur when you
turn on the printer.
8
Lower the Release Lever and close the Top Cover.
9
Turn the printer on. (See "Turning the Printer On and Off.")
→User's Guide
Roll paper cannot be inserted into the paper feed slot
Roll paper cannot be inserted into the paper feed slot
Cause
Corrective Action
The roll paper is warped.
Straighten out curls and reload the roll.
Paper is jammed by the paper feed slot.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
→P.100
(See "Clearing a Jammed Sheet.")
→P.103
The paper source selection is incorrect.
Press the
Load
button and select the paper source.
iPF9400S
Roll paper cannot be inserted into the paper feed slot
Basic Guide
Troubleshooting
Problems Regarding Paper
105
