1
Press the
Load
button.
2
Press
▲
or
▼
to select
Load Roll Paper
, and then press the
OK
button.
Note
•
If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press
▲
or
▼
to select "
Yes
", and then press the
OK
button. Remove the paper and go to the next step.
3
Open the Top Cover and lift the Ejection Guide.
4
Holding the Roll Holder so that the side with the
white gear faces the side of the Roll Holder Slot
with a white gear, load the Roll Holder shaft (a) into
the grooves (b) on both ends of the Roll Holder
Slot, fully into the slot.
Caution
•
Be careful not to drop the roll and hurt yourself when loading it.
•
Be careful not to pinch your fingers between the Roll Holder shaft (a) and the guide grooves (b) when loading
rolls.
Loading Rolls in the Printer
iPF9400S
Basic Guide
Handling Paper
Handling rolls
12
