Canon imagePROGRAF iPF9400S Basic Manual Download Page 51

Page: 51 / 154

Press the

button.

The

Set./Adj. Menu

is displayed.

Press

▲

▼

to select

Maintenance

, and then press the

button.

Press

▲

▼

to select

Repl. S. Cleaner

, and then press the

button.

The Carriage moves. When it finishes moving, instructions are displayed on the Display Screen.

Open the Top Cover.

Note

•

If you do not respond within two minutes, shaft cleaner replacement is canceled. In this case, repeat the proce-
dure.

Hold the Shaft Cleaner on the right side of the Car-
riage by the grips (a) and pull it to the right to re-
move it.

iPF9400S

Replacing the Maintenance Cartridge

Basic Guide

Consumables and Maintenance

Maintenance Cartridge

Summary of Contents for imagePROGRAF iPF9400S



























































































































































Search results

Summary of Contents for imagePROGRAF iPF9400S

Reviews:

Related manuals for imagePROGRAF iPF9400S

Brands by name

Popular brands

Canon imagePROGRAF iPF9400S, Basic Manual

Search results

Summary of Contents for imagePROGRAF iPF9400S

Reviews:

Related manuals for imagePROGRAF iPF9400S

Brands by name

Popular brands