Canon imagePROGRAF iPF9400S Basic Manual Download Page 86

Page: 86 / 154

Installing the Printer Driver (Mac OS X)

Installing the Software

The basic instructions for installing the software are as follows.
For detailed instructions, see the Setup Guide.

Supported connection methods

The printer driver works over USB or network (Bonjour or IP) connections.
Follow these steps to install the software and Electronic manuals.

Installing the software and electronic manuals

Important

•

When the printer is used over a network, the printer's IP address may be changed if you reinstall the printer. In this
case, be sure to reconfigure the printer's IP address.

After making sure the computer and printer are not connected by a cable, turn the computer on.

Insert the provided User Software CD-ROM for the
appropriate operating system in the CD-ROM drive.

Follow the instructions displayed to complete instal-
lation.

Installing the Software (Mac OS X)

iPF9400S

Basic Guide

Software Installation

Installing the Printer Driver (Mac OS X)

Summary of Contents for imagePROGRAF iPF9400S



























































































































































Search results

Summary of Contents for imagePROGRAF iPF9400S

Reviews:

Related manuals for imagePROGRAF iPF9400S

Brands by name

Popular brands

Canon imagePROGRAF iPF9400S, Basic Manual

Search results

Summary of Contents for imagePROGRAF iPF9400S

Reviews:

Related manuals for imagePROGRAF iPF9400S

Brands by name

Popular brands