manualshive.com logo in svg

Canon imagePROGRAF iPF9400, User Manual

The Canon imagePROGRAF iPF9400 boasts exceptional printing capabilities and advanced technology. Unlock the full potential of this professional-grade printer by accessing its comprehensive User Manual, available for free download from manualshive.com. Elevate your printing experience with this cutting-edge device, armed with step-by-step instructions and invaluable insights.

Share
Download
background image

Cannot print over a network

Cannot print over a network

Cannot connect the printer to the network .........................................................................................................

899

Cannot print over a TCP/IP network ...................................................................................................................

899

Cannot print over a NetWare network ................................................................................................................

899

Cannot print over AppleTalk or Bonjour networks .............................................................................................

900

Cannot connect the printer to the network

Cannot connect the printer to the network

Cause

Corrective Action

The Ethernet cable is
not connected cor-
rectly to the printer's
Ethernet port.

1.

Make sure the printer is connected to the network with the correct Ethernet cable, and then turn the printer on. For
instructions on connecting the cable, refer to the Setup Guide.

2.

Make sure the Link indicator is lit.
The top and bottom indicators are lit if the printer is connected via 1000Base-T. The bottom indicator is green if the
printer is connected via 100BASE-TX, and the top indicator is orange if connected via 10BASE-T.
If the Link indicator is not lit, check the following points.

•

Make sure the hub is on.

•

Make sure the end of the Ethernet cable is connected correctly.
Insert the Ethernet cable until it clicks and locks in place.

•

Make sure there is no problem with the Ethernet cable.
If there is any problem, replace the Ethernet cable.

•

Check the communication mode with the hub.
Although the printer normally detects the hub communication mode and transmission rate automatically (in auto
negotiation mode), sometimes the hub settings cannot be detected. In this case, configure the connection meth-
od manually, specifying the communication mode in use.

 (See "Configuring the Communication Mode Manually.")

→P.727

Cannot print over a TCP/IP network

Cannot print over a TCP/IP network

Cause

Corrective Action

The printer's IP address is not configured correctly.

Make sure the printer's IP address is configured correctly.

 (See "Configuring the IP Address Using imagePROGRAF Device Setup Utility.")

→P.730

 (See "Configuring the IP Address Using the Printer Control Panel.")

→P.705

The printer's TCP/IP network settings are not config-
ured correctly.

Make sure the printer's TCP/IP network settings are configured correctly.

 (See "Configuring the Printer's TCP/IP Network Settings With RemoteUI.")

→P.709

The computer you are trying to print from is not con-
figured correctly.

Make sure the computer's TCP/IP network settings are configured correctly.

 (See "Configuring the Printer Driver Destination (Windows).")

→P.708

 (See "Configuring the Destination in TCP/IP Networks (Mac OS X).")

→P.720

Cannot print over a NetWare network

Cannot print over a NetWare network

Cause

Corrective Action

The printer's NetWare settings are
not configured correctly.

Make sure the printer's NetWare settings are configured correctly. In particular, make sure a valid frame
type is selected.
For details, 

see "Configuring the Printer's NetWare Network Settings With RemoteUI."

→P.717

The computer you are trying to
print from is not configured correct-
ly.

Make sure the computer's NetWare settings are configured correctly.
For details, 

see "Configuring NetWare Network Settings."

→P.712

The NetWare server and services
are not configured correctly.

Check the following points.

1.

Make sure the NetWare file server is running.

iPF9400

                                                                                                                                                                           

Cannot connect the printer to the network

User's Guide

                                                                                                                                                                                                                                        

 

 

Troubleshooting

Cannot print over a network

899

 

Summary of Contents for imagePROGRAF iPF9400





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for imagePROGRAF iPF9400

Summa S CLASS User Manual preview
S CLASS
Brand: Summa Pages: 89
TE Connectivity AMS300 Operating Instructions Manual preview
AMS300
Brand: TE Connectivity Pages: 15

Brands by name

Popular brands

Load more brands