Canon imagePROGRAF iPF9400, User Manual

Page: 118 / 964

7
Click the Page Setup tab to display the Page Setup
sheet.
8
Click
O
Size Options to display the Paper Size Options dialog box.
9
Enter a desired paper name in Custom Paper Size Name . 430 mm Square is used in this example.
10
Select mm in Units .
11
Enter 430 (16.9 in) in both Width and Height .
Note
•
If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either Width or Height ,
the other value will be automatically applied based on the original aspect ratio.
12
Click Add to register 430 mm Square .
13
Click OK to close the Paper Size Options dialog box.
14
Click Cut Sheet in the
L
Paper Source list.
15
In the
A
Page Size list, click the size you added, 430 mm Square .
16
Confirm the print settings and print as desired.
Note
•
For tips on confirming print settings, see "
Confirming Print Settings
→P.176
"
Printing on Non-Standard Paper Sizes (Mac OS X) Printing on Non-Standard Paper Sizes (Mac OS X)
For printing on non-standard size paper, first register the paper size in the printer driver.
Call a non-standard paper size registered in the printer driver with
Custom Page Sizes (Mac OS X v10.5)/ Custom
Paper Sizes (Mac OS X v10.6 or later).
Once you register Custom Page Sizes / Custom Paper Sizes , you then can select it repeatedly from the paper size
list.
Custom Page Sizes / Custom Paper Sizes can be set up to 18.0 m.
This topic describes how to register a non-standard paper size by the name of 430*430 and print based on the following
example.
Printing on Non-Standard Paper Sizes (Mac OS X) iPF9400
User's Guide
Enhanced Printing Options
Printing banners or at other non-standard sizes
118