Canon imagePROGRAF iPF780, User Manual

Page: 87 / 594

9
Select the print target in the
E
Print Target list.
Important
• When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit
touches printing surfaces that are not dry yet, it may damage the paper or the edge of the document that
is cut, depending on frequency of use. In this kind of situation, change the ink drying time in
Between
Pages in the Paper Detailed Settings dialog box.
10
Access the Page Setup pane.
11
Select and click a roll paper in the
A
Paper Source list.
12
Select the paper width of the roll loaded in the printer for
B
Roll Width . In this case, 10 in. (254.0mm) is
selected.
13
Select the
D
Enlarged/Reduced Printing check box.
14
Select the
H
Borderless Printing check box.
This ensures that
F
Fit Roll Paper Width is automatically selected in
D
Enlarged/Reduced Printing .
15
Confirm the print settings, and then click
M
Print to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings ."
➔
P.250
iPF780 Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)
User's Guide
Enhanced Printing Options
Borderless Printing
87