Other problems
Other problems
The Ink Tank Cover has become detached from the printer .......................................................................
549
The printer does not go on .........................................................................................................................................
549
If the Printer Makes a Strange Sound ....................................................................................................................
549
Messages advising to check the maintenance cartridge are not cleared ..............................................
549
The printer consumes a lot of ink ............................................................................................................................
550
Ink Level Detection .........................................................................................................................................................
550
The Ink Tank Cover has become detached from the printer
The Ink Tank Cover has become detached from the printer
Cause
Corrective Action
The Ink Tank Cover became detached from the printer because too much
force was applied to the Ink Tank Cover.
Attach the Ink Tank Cover to the printer.
(See "Attach the Ink Tank Cover to the printer.")
➔
P.498
The printer does not go on
The printer does not go on
Cause
Corrective Action
The printer is unplugged.
Plug the power cord into the outlet, and then turn on the printer.
The specified voltage is not supplied. Check the voltage of the outlet and breaker.
(See "Specifications.")
➔
P.574
If the Printer Makes a Strange Sound
If the Printer Makes a Strange Sound
Cause
Corrective Action
The printer
makes a sound
during opera-
tion.
The following sounds do not indicate a problem with the printer.
•
There is a sound of suction from the Platen
To prevent paper from rising, paper is held against the Platen by suction from Vacuum holes under it.
•
There is a sound when a different size of paper is used and when the Carriage goes from side to side
When paper of a different size is used, a valve is automatically activated to switch the area for paper suction,
which may make a sound. This mechanism prevents suction from Vacuum holes where there is no paper.
In addition, ink is ejected in sync with the movement of the Carriage back and forth to ensure optimal ink flow.
At this time, the valve automatically switches the area for paper suction, which may make a sound.
•
Roll paper makes a fluttering sound during printing
There may be a fluttering sound when large paper is advanced.
•
If you suddenly hear the tone for cleaning operations
At regular intervals, for printer maintenance, cleaning operations will begin automatically, even if the printer is
in Sleep mode.
•
If you suddenly hear the tone for ink agitation
At regular intervals, to ensure optimal printing quality, the ink is agitated automatically, even if the printer is in
Sleep mode.
The ink is also agitated automatically under the following conditions. Note that other operations are not possi-
ble while "
Agitating...
" is displayed on the control panel.
•
After the printer is turned on
In other cases, contact your Canon dealer.
Messages advising to check the maintenance cartridge are not cleared
Messages advising to check the maintenance cartridge are not cleared
Cause
Corrective Action
The printer has not detected the new Mainte-
nance Cartridge that was used to replace the old
one.
Remove the new Maintenance Cartridge you have just installed and insert it
again firmly.
(See "Replacing the Maintenance Cartridge.")
➔
P.508
iPF780
The Ink Tank Cover has become detached from the printer
User's Guide
Troubleshooting
Other problems
549
Summary of Contents for imagePROGRAF iPF780
