Canon imagePRESS C7011VPS series, Operation Manual

Page: 36 / 391

NOTE
• If you want to staple more than 50 sheets (80 g/m² / 22 lb bond) of A3, B4, or A4R paper, or
100 sheets (80 g/m² / 22 lb bond) of A4 or B5 paper, the copies/prints are only offset but not
stapled. In addition, when selecting coated or heavy paper, you may not be able to use
stapling even if the number of sheets, including sheet insertions or job separators, is below
the set limit of a finisher.
• If you want to staple more than 50 sheets (80 g/m² / 22 lb bond) of 11" x 17", LGL or LTRR
paper, or 100 sheets (80 g/m² / 22 lb bond) of LTR or EXEC paper, the copies/prints are only
offset but not stapled. In addition, when selecting coated or heavy paper, you may not be able
to use stapling even if the number of sheets, including sheet insertions or job separators, is
below the set limit of a finisher.
• If the machine stops while stapling because almost all of the staples have been used the
staple cartridge must be replaced.
• Saddle stitching (booklets)
IMPORTANT
• Saddle stitching (booklets) is available only if the Saddle Finisher-AJ2 is attached.
• The maximum number of sheets that can be saddle stitched differs depending on the paper
weight and type.
- When using plain paper (80 g/m² / 22 lb bond), 25 sheets of paper (100 pages) can be saddle
stitched at once.
- When using coated paper (80 g/m² / 22 lb bond), 15 sheets of paper (60 pages) can be saddle
stitched at once.
• The paper sizes that can be saddle stitched are: 330.2 mm x 482.6 mm, 320 mm x 450 mm
(SRA3), 304.8 mm x 457.2 mm, A3, B4, A4R, and irregular size (210 mm x 279.4 mm to 330.2
mm x 487.7 mm).
The paper sizes that can be saddle stitched are: 13" x 19", 12.60" x 17.72", 12" x 18", 11" x 17",
LGL, LTRR, and irregular size (8 1/4" x 11" to 13" x 19 13/64").
• The accuracy of folds created with saddle stitching may vary, depending on the paper type
and the number of sheets.
• Saddle pressing
Saddle press enables you to compress a saddle stitched booklet spine.
1 1
[10] Cross section (1)
IMPORTANT
Saddle press is automatically used when you select booklet.
NOTE
To make sure that saddle pressing is effective, you must saddle stitch more than nine sheets of
paper (including one cover sheet).
• Punching
The stacker/stapler, optional inserter and optional integrated punch unit
36 Chapter 2 - Main parts