Canon imagePRESS C7011VPS series Operation Manual Download Page 210

Page: 210 / 391

Step

Actions on the print‐
er

Actions on the host

Remarks

Change the active
PDL when currently
the wrong PDL is ac-
tive. This is only pos-
sible when you have
licenses for more
than 1 PDL.

Via the Settings Editor: [Transac-
tion printing] -> [Setups] -> [Re-
quested active PDL].

Load the required
media into the paper
trays.

Only required when the active set-
up has set the tray mode to tray to
tray.

Put the printer on-
line.

• Via the operator panel: [System]

-> [Transaction] -> [Transaction
online] -> [On], or

• Via the Settings Editor: [Trans-

action printing] -> [Settings] ->
[Switch the printer online or off-
line].

Connect to the printer.

Submit the transaction
print jobs.

Print the transaction
print jobs.

You must perform all the regular
activities, for example load the
media, empty the output locations,
add the supplies and solve errors.

Put the printer off
line when the trans-
action print jobs are
ready.

• Via the operator panel: [System]

-> [Transaction] -> [Transaction
online] -> [Off], or

• Via the Settings Editor: [Trans-

action printing] -> [Settings] ->
[Switch the printer online or off-
line].

Switch the printer
back to the docu-
ment printing mode.

• Via the operator panel: [System]

-> [Transaction] -> [Transaction
printing mode] -> [Off].

Introduction to the [Transaction] section

210

Chapter 8 - Carry out print jobs

Summary of Contents for imagePRESS C7011VPS series








































































































































































































































































































































































































Search results

Summary of Contents for imagePRESS C7011VPS series

Reviews:

Related manuals for imagePRESS C7011VPS series

Brands by name

Popular brands

Canon imagePRESS C7011VPS series, Operation Manual

Search results

Summary of Contents for imagePRESS C7011VPS series

Reviews:

Related manuals for imagePRESS C7011VPS series

Brands by name

Popular brands