Canon imagePRESS C7011VPS series, Operation Manual

Page: 135 / 391

Load the media into the special feeder (optional)
Introduction
You can use the special feeder to feed media manually.
IMPORTANT
• Note the following points when using the special feeder:
- Paper Quantity: one to approximately 100 sheets (80 g/m² / 22 lb bond, stack approximately
11 mm / 3/8" high)
- Paper Sizes: 330.2 mm x 482.6 mm, 320 mm x 450 mm (SRA3), 304.8 mm x 457.2 mm, A3,
B4, A4, A4R, B5, B5R, A5R, and Irregular Size (139.7 mm x 182 mm to 330.2 mm x 487.7 mm)
- Paper Sizes: 13" x 19", 12" x 18", 11" x 17", LGL, LTR, STMT, LTRR, EXEC, EXECR, STMTR and
Irregular Size (5 31/64" x 7 1/8" to 13" x 19 13/64")
- Paper Weight: 64 to 256 g/m² / 18 lb bond to 68 lb bond
- Paper which has been rolled or curled must be straightened out prior to use, to allow the
paper to feed smoothly through the special feeder (allowable curl amount: less than 10 mm /
3/8" for normal paper, less than 5 mm / 1/5" for heavy paper). There are some types of paper
stock which may meet the above specifications, but cannot be fed into the special feeder.
• Do not load different size/type paper at the same time.
• Feed coated paper one sheet at a time. Loading several sheets together may cause paper
jams.
• Depending on the type of heavy paper you want to load, if you load multiple sheets of heavy
paper into the special feeder, a paper jam may occur. In this case, load only one sheet of
heavy paper at a time.
• If you are making two-sided prints, the printed paper may crease depending on the moisture
absorption condition of the paper, and if you copy the two pages as two one-sided
documents.
• When printing on special types of paper, such as heavy paper or transparencies, be sure to
correctly set the paper type, especially if you are using heavy paper. If the type of paper is not
set correctly, it could adversely affect the quality of the image. Moreover, the Fixing Station
may become dirty and require a service repair, or the paper could jam.
NOTE
• Standard Size
You can select standard inch paper, or A or B series paper.
• Customer size
You can load nonstandard paper sizes:
Metric units: 139.7 mm x 182 mm to 330.2 mm x 487.7 mm.
Imperial units: 5 31/64" x 7 1/8" to 13" x 19 13/64"
If you are using STMT paper, load the paper horizontally.
Procedure
1. Open the special feeder.
Load the media into the special feeder (optional)
Chapter 7 - Media handling 135