manualshive.com logo in svg

Canon GP200, Service Manual, Page: 90 / 458

Share
Download
Canon GP200 Service Manual Download Page 90

b. Shift Processing

Figures 3-309, -310, and -311 give samples of image shifting and conceptual outlines of shifting in

main/sub scanning direction.

Figure 3-309

Figure 3-310

Figure 3-311

a b c

a b c

a b c

Main scanning direction

Reading starts with this pixel.

Not read.

a b c

a b c

a b c

Shifting in Main Scanning Direction

Main scanning derection

Not read

Memory>

Reading starts 
with this pixel.

a b c

a b c

a b c

a b c

a b c

<Original>

Main scanning 
direction

Sub scanning 

direction

<Copy>

Shift in sub scannig direction

<Copy>

Principle : When data for a single scanning line is 

read from line memory, reading is started 
with a midway pixel or the timing at which 
the data of the first pixel is read is delayed, 
thereby shifting pixel position.

Principle : 

The position or the timing 
at which the original 
illuminating system is started is
varied to shift the position of 
the image.

Shaft in main scanning direction

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

3–36

3. OPERATIONS AND TIMING

Summary of Contents for GP200











































































































































































































































































































































































































































































Reviews:

No comments