manualshive.com logo in svg

Canon GP200, Service Manual, Page: 382 / 458

Share
Download
Canon GP200 Service Manual Download Page 382

E. Installing the Cassettes

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

5–14

5. INSTALLATION

Remarks

No.

1

2

3

Switch

Label

Boss

Work

Slide out the cassette.

Check with the user to find out
the most frequently used type of
copy paper. Then, operate the
switch to select A/B- or Inch-con-
figuration.
Each cassette has its own switch.
Be sure to set all switches.
If you changed the switch posi-
tion, you must change the paper
size dial label in the next step.

Attach the label to the paper size
dial. (At this time, be sure to
match the boss on the dial and
the cut in the label.)

Note:
The label may be for A/B- or
Inch-configuration. Be sure
the correct label is used.

Summary of Contents for GP200











































































































































































































































































































































































































































































Reviews:

No comments