manualshive.com logo in svg

Canon GP200, Service Manual, Page: 76 / 458

Share
Download
Canon GP200 Service Manual Download Page 76

B. Varying the Reproduction Ratio

The reproduction ratio in the main scanning direction (drum axis) is changed by skipping (reduction)

image signals when writing into line memory or reading a multiple number of times (enlargement) when
reading from the line memory.

The reproduction ratio in the sub scanning direction, on the other hand, is changed by moving the mir-

ror mount faster (reduction) or slower (enlargement).

C. Sequence of Operations (original exposure system)

Figure 3-203

Scanner motor (M2)

Scanner home position 
sensor (PS1)

Scanning lamp (FL1)

INTR 

SCFW

SCFW

SCFW

LSTR

STBY

STBY

SCRV

SCRV

SCRV

SLEEP 

Forward Reverse

Copy Start key ON

control panel 
power switch ON

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

3–22

3. OPERATIONS AND TIMING

Summary of Contents for GP200











































































































































































































































































































































































































































































Reviews:

No comments