manualshive.com logo in svg

Canon GP200, Service Manual, Page: 133 / 458

Share
Download
Canon GP200 Service Manual Download Page 133

B. Pick-Up from the Cassette

1. Pick-Up Operation

The copy paper inside the cassette is held up by the lifter so that it is in contact with the pick-up roller

during pick-up.

The pick-up roller is driven by the cassette pick-up motor (M4) and is lowered to reach copy paper at

time of pick-up.

The pick-up roller is lowered by the movement of a cam operated by the drive of the main motor (M1)

switched by the pick-up roller down solenoid (SL2).

The feeding roller and the separation roller make sure that only one sheet of copy paper is fed; the copy

paper is moved to the feeding assembly and then to the registration roller by the vertical path roller 1/2.

The drive of the vertical path roller and the pre-registration roller is from the main motor (M1) switched

by turning ON and OFF the vertical path roller clutch (CL3).

The drive of the registration roller is from the main motor (M1) coming by way of the registration roller

clutch (CL1).

Figure 3-603 shows the arrangement of the electrical parts and the concept of the drive mechanism,

and Table 3-603 shows the sensors and sensor signals.

3–79

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

3. OPERATIONS AND TIMING

Note: Pulse signal so that it cannot be checked by a meter in reference to its state (0, 1).

Table 3-603 List of Loads in the Cassette Pick-Up Assembly

Notation

Name

Signal

DC controller

M1

Main motor

MMD

J114-B6

M4

Cassette pick-up motor

Note

J114

CL1

Registration roller clutch

RGCD*

J114-B11

CL3

Vertical path roller clutch

CL3D*

J114-A4

SL2

Pick-up roller down solenoid

SL2D*

J114-A5

Summary of Contents for GP200











































































































































































































































































































































































































































































Reviews:

No comments