manualshive.com logo in svg

Canon GP200, Service Manual, Page: 104 / 458

Share
Download
Canon GP200 Service Manual Download Page 104

7. Binary Processing

The binary processing circuit converts multi-

ple-value image signals into binary signals. The
method used here is called the PD method, which
enables better reproduction of highlight areas
than the median density (MD) retention method.

Binary processing is executed in text mode

and text/photo mode.

8. D-A Conversion

The D-A conversion circuit is used to convert

multiple-value image signals into analog signals.
D-A conversion is executed in photo mode

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

3–50

3. OPERATIONS AND TIMING

Summary of Contents for GP200











































































































































































































































































































































































































































































Reviews:

No comments